Control distortion of holes and slots near bend lines
Consistently form short or tapered flanges
Produce virtually mark-free parts
Prevent cross-metal contamination
Minimize die changes – form a wide range of material thicknesses with a single die
Specifications
A. Maximum Material Thickness
8 mm 0.315 in
B. Maximum Outside Radius
23 mm 0.906 in
C. Minimum Outside Leg Length
24.3 mm 0.957 in
D. Maximum Bend Angle
75 º
E. Tonnage Capacity
250 T/m 84 tons/foot
Standard Length
500 mm (16.67 in) 455 mm (17.91 in Sectioned)
Note
Maximum bend angles may vary depending on punch tip radius and material thickness. Smaller angles are possible subject to condition. (please contact your sales representative).