Blog

BLUE ROLL URETHANE DIE FILM

BLUE Press Brake Urethane Die Film-  higher duty
This is a high wear resistant urethane film with excellent tear resistance.
Extruded from 85 shore A durometer polymer for superior toughness.
This film lasts approximately 3 times the standard urethane die film.

MAR-FREE URETHANE FROM JR-BISON IS THE NEWEST FORM OF PROTECTION AND COST SAVINGS FOR YOUR DIES AND MATERIALS!

  • Prevents Marking On Various Materials
  • Produces Clean and Precise Bends
  • Available in  4″, 6″ and 12″ widths x  .022″ thickness
  • Reduces Wear on Dies
  • Competitively Priced
  • Safe and Easy to Use
  • Most Orders Ship Same Day or Next Day

MarFree™! Urethane will prevent marring die marks on a wide variety of metal bending polished including stainless steel, painted metal, aluminum and polished materials.

Save Time and Money
By Avoiding Re-Polishing and
Buying New Blanks!

Stair Way Rail Pipe Notcher

Stair Way Rail Pipe Notcher:

Looking to produce a 35 degree metal stair way? The #1500 Angle Notcher miters your pipe or tube at a specified angle in two-press cycles. This unit will produce the 35 degree cope on one cycle and the 55 degree cope with the second cycle.  Knife sets are made of tool steel A2 material and produce great production.  The coper notcher pipe knife sets are replaceable.   Common applications include hand rails, ATV frames and many more. Quality USA precision made tooling.

 

stairway pipe notcher

35 degree stairway notcher

Press Brake Magnetic Squaring Arm

Press brake magnetic squaring arm:

  • Attaches magnetically for instant setup
  • Allows small parts to be formed safely – hands free
  • Equipped with angle attachment for tapered flanges
  • Attaches to die face with no intrusion into the forming area
  • Available in both left and right hand models
  • Both sides of the squaring arm can be used simultaneously

Great for small parts and increased production.

 

Coolube 2210AL Aluminum metal cutting lubricant

Coolube 2210AL   Aluminum metal cutting lubricant

Aluminum Advantage

Unist has expanded its line of MQL lubricants with a new oil specifically formulated for use with aluminum. Like all of Unist’s fluids, Coolube® 2210AL aluminum cutting fluid is derived from natural vegetable oils, is machinist and environmentally friendly, and there are no VOC’s.

Unist Coolube® 2210AL provides specific benefits when machining aluminum. Testing shows this aluminum bandsaw lubrication oil provides exceptional lubricity and stability under load, which helps improve tool life. Unist Coolube® 2210AL is nearly odorless and does not cause skin, eye, or throat irritation.

Are you tired of dealing with the mess with band saw and other metal working coolant?  This may be your solution.  No more coolant treatment or disposal.  No more hazardous waste or wet areas in the shop.  Easier clean-up at the end of the day.  Here are some of the Coolube benefits:

  • Improved Tool Life
  • Increased Chip Value
  • No Employee Health Concerns
  • No Fluid Oxidation (Stickiness)
  • No Coolant Treatment or Disposal

Using the right lubricant is very important in MQL applications. The perfect lubricant will adhere to the surface of the tool and provide a thin, low friction barrier between the cutting tool and work piece. Studies have shown that Coolube® has superior properties which make it an ideal lubricant.

Coolube’s® polar properties create a strong consistent bond between Coolube® and metallic surfaces.

Other impacts on your bottom line:  Reduced house cleaning cost and an increase in the recycling of chips because they are clean and dry.

Coolube is as good for your shop as it is for the global environment.  Its non-toxic formula is safe for workers and will not cause dermatitis.

We have small trial bottles available if you would like to check it out- send us an email with your address and application and we will send it out at no charge.unist chips

UnitPunch with Multicyl for metal clinching applications

Unipunch with Multicyl recently developed a new innovation expanding our capabilities – they have combined the MultiLoc metal joining technology using the patented BTM clinch tooling with the Unipunch tooling system.

Our customers can now use a single Multicyl system and Unipunch tool holder for both hole punching and metal joining using standard interchangeable tooling components. Great for low volume production work.