Posted on

BLUE ROLL URETHANE DIE FILM

urethane_blue_press_brake_die_film
BLUE Press Brake Urethane Die Film-  higher duty
This is a high wear resistant urethane film with excellent tear resistance.
Extruded from 85 shore A durometer polymer for superior toughness.
This film lasts approximately 3 times the standard urethane die film.

MAR-FREE URETHANE FROM JR-BISON IS THE NEWEST FORM OF PROTECTION AND COST SAVINGS FOR YOUR DIES AND MATERIALS!

  • Prevents Marking On Various Materials
  • Produces Clean and Precise Bends
  • Available in  4″, 6″ and 12″ widths x  .022″ thickness
  • Reduces Wear on Dies
  • Competitively Priced
  • Safe and Easy to Use
  • Most Orders Ship Same Day or Next Day

MarFree™! Urethane will prevent marring die marks on a wide variety of metal bending polished including stainless steel, painted metal, aluminum and polished materials.

Save Time and Money
By Avoiding Re-Polishing and
Buying New Blanks!
Posted on

Press Brake Magnetic Squaring Arm

press_brake_magnetic_squaring_arm

Press brake magnetic squaring arm:

  • Attaches magnetically for instant setup
  • Allows small parts to be formed safely – hands free
  • Equipped with angle attachment for tapered flanges
  • Attaches to die face with no intrusion into the forming area
  • Available in both left and right hand models
  • Both sides of the squaring arm can be used simultaneously

Great for small parts and increased production.

 

Posted on

Urethane Press Brake Die Film

urethane press break die film

Bison Brand Urethane Film for Press Brake Tooling

Press Brake Urethane film from Bison Brand is the newest form of protection and cost savings for your dies and materials!

  • Prevents Marking On Various Materials
  • Produces Clean and Precise Bends
  • Available in 2”, 4”, 6” and 12” widths, .015” & .030” thickness
  • Reduces Wear on Dies
  • Competitively Priced
  • Safe and Easy to Use
  • Most Orders Ship Same Day or Next Day

Bison Brand Urethane will prevent marring die marks on a wide variety of metal bending polished including stainless steel, painted metal, aluminum and polished materials.

Save Time and Money By Avoiding Re-Polishing and Buying New Blanks!

Samples available upon request

Posted on

Press Brake Tonnage Chart

The Press Brake Tonnage Chart is a valuable reference chart when air-bending metal on a press brake.   When forming metal up to 1/2″ thick, we generally use a 8:1 ratio between the v-die opening and the material thickness.  For 1/4″ material, you would use a 2″ v-die.  From the chart- when you know the material thickness and type- you are able to determine with some accuracy the tonnage requirements using the different v-die openings.  Keep in mind, the chart is calculated on forming mild steel.    The chart will also provide the minimum flange length and the inside radius the different v-die openings will produce.

When forming materials 1/2″ and over – the recommended v-die opening ratio is 10:1 to material thickness.

Press_Brake_Air-Bending_Tonnage_Chart